Interior Painting
Fresh, even color throughout the rooms you live in, from a single bedroom to a whole-home repaint.
Painting Contractor in Arlington, VA
Interior and exterior residential painting with the prep work done right: patched walls, clean lines on trim and doors, protected floors, and a finish that holds up to everyday life.
- Arlington based
- Licensed & insured
- Written estimates
Interior & Exterior Painting Services in Arlington
Whether it is one room, every door in the house, or the trim and entry door outside, we scope the work in writing, handle the repairs painting depends on, and leave the space clean when we finish.
Walls & Ceilings
Smooth walls and uniform ceilings without lap marks, flashing, or stains showing through.
Interior Doors
Doors refinished in a durable enamel that resists fingerprints and scuffs, in a new color or refreshed.
Trim & Baseboards
Crisp lines on baseboards, casings, and crown, with gaps caulked so the finish looks tight.
Drywall Repair & Painting
Holes, cracks, and damaged sections repaired and blended so the patch disappears under the paint.
Exterior Painting
Weathered wood surfaces scraped, primed, and recoated to protect them and sharpen curb appeal.
Exterior Doors & Trim
A front entry and trim that look finished again, coated for sun, rain, and daily use.
Deck & Fence Painting or Staining
Wood cleaned, prepped, and coated with a paint or stain that suits its age and condition.
Interior Painting in Arlington, VA
Good interior painting is mostly what happens before the color goes on. Here is how we approach the different parts of a house.
Walls and ceilings
We fill nail holes and dents, sand patches flush, and spot prime repairs so they do not show as dull spots in the final coat. Ceilings get a flat finish that hides minor surface flaws, and water stains are sealed with a stain-blocking primer first so they do not bleed back through.
Doors, baseboards, window trim and crown molding
Trim and doors take the most contact, so they get a harder enamel in a satin or semi-gloss sheen. We clean and scuff-sand existing glossy finishes so new paint bonds, caulk open joints, and cut clean lines where trim meets the wall. Hardware is removed or masked, never painted over.
Hallways and stairways
These areas collect scuffs from bags, pets, and hands on the rail. We plan for a washable wall finish, set up safe access over stairwells for the high walls, and schedule the work so you can still move through the house.
Bedrooms, living spaces and basements
We work room by room, moving and covering furniture as we go, so the rest of the house stays usable. In basements we look at moisture and prior damage before painting, because paint cannot fix a wall that is still getting wet.
Drywall repairs before painting
Cracks at seams, popped nails, door-knob holes, and patches from old wiring or fixtures are repaired, textured to match, and primed as part of the same job. You do not need a separate contractor to get the walls ready.
Interior Door Painting Project in Arlington, VA
A recent project from our own crew: interior doors repainted from green to a warm brown to work with the home's white trim and hardwood floors.
The existing doors
The doors had a green finish that no longer suited the house. The homeowner wanted a richer brown that would stand apart from the white trim and connect with the hardwood flooring.
Preparation
Floors were covered and hardware was removed or masked. The doors were cleaned, dings were filled, and the old finish was scuff-sanded so new paint would bond instead of peel.
Repainting
A primer went on first so the green would not ghost through the new color. Finish coats followed, worked evenly across the panels and edges to avoid heavy brush marks.
The result
Brown doors framed by clean white trim, tying the woodwork to the hardwood floor tones. Hardware went back on, the area was cleaned, and we walked the finished doors with the homeowner.
Our Painting Preparation Process
Preparation is what makes the finish. Every interior job follows the same sequence, so nothing gets skipped when the schedule gets tight.
- Protect flooringDrop cloths and floor protection along every work path, not just under the wall being painted.
- Cover furnitureFurniture is moved to the center of the room and covered, or moved out where needed.
- Remove or protect hardwareSwitch plates, outlet covers, and door hardware come off or get masked.
- Patch holesNail holes, anchors, and dents are filled and allowed to dry fully.
- Repair damaged drywallCracks, torn paper, and larger damage are cut out and repaired properly.
- Sand surfacesPatches sanded flush and glossy trim scuffed so paint grips.
- Caulk gaps where appropriateOpen joints at trim and baseboards are caulked for tight, clean lines.
- Prime where neededRepairs, stains, bare wood, and big color changes get the right primer.
- Apply finish coatsFinish coats applied evenly, with drying time respected between coats.
- CleanupProtection removed, furniture and hardware returned, work area cleaned.
- Final walkthroughWe walk the space with you and handle any touch-ups before we call it done.
Drywall, Trim & Repairs Before Painting
Many painting jobs are really repair jobs first. A painter who only paints either works around the damage or sends you looking for someone else. We handle the whole sequence under one written scope.
- Drywall repair
- Trim repair
- Caulking
- Preparation
- Painting
That covers cracked seams, water-stained or soft drywall after the source is fixed, split or loose baseboards, damaged door casings, and trim pieces that need replacing before they can be painted. Because we are a remodeling contractor, carpentry and drywall are part of our regular work, not a subcontract.
One crew, one schedule, one estimate. You get fewer trips, no finger-pointing between trades, and walls that look right because the repair and the paint were done by the same people.
Water-Damaged Drywall Repair in Arlington, VA
A completed project from our crew: ceiling drywall damaged by water was cut out, rebuilt, finished smooth, and painted so the repair blends into the rest of the ceiling.
Exterior Painting in Arlington, VA
Exterior paint is protection first. When trim and wood start to peel, water gets in behind it. We focus on the wood and trim surfaces that need the most care.
- Exterior doors: front, side, and back doors prepped and coated with an exterior enamel.
- Trim: window and door casings, fascia, and corner boards.
- Wood siding and components: wood siding sections and exterior wood details.
- Porch elements: railings, columns, posts, and porch ceilings.
- Decks and fences: painting or staining, matched to the wood's condition. Need structural work first? See our deck building and repair services.
How exterior prep works: loose and failing paint is scraped, edges are sanded smooth, bare wood and repairs are primed, and then finish coatings are applied. Soft or rotted wood is flagged and can be replaced before painting instead of being painted over.
Exterior work depends on weather. We schedule around temperature, humidity, and rain so coatings cure the way the manufacturer intends.
Professional Paint Products for the Project
The right product depends on the surface, how much wear it gets, and your budget. We work with Benjamin Moore and Sherwin-Williams lines, and the product and sheen for each surface are written into your estimate.
Walls
Matte or eggshellWashable premium wall paints such as Benjamin Moore Regal Select or Sherwin-Williams Emerald and SuperPaint, chosen by how much cleaning the room needs.
Ceilings
FlatFlat ceiling paints that hide surface flaws and reduce glare from windows and lighting.
Doors & trim
Satin or semi-glossHard-curing enamels such as Benjamin Moore Advance or Sherwin-Williams Emerald Urethane Trim Enamel, which level out smoothly and stand up to handling.
Primers & stain blocking
As neededBonding primers over glossy finishes, stain-blocking primers over water marks, and high-hide primers for dramatic color changes.
Exterior surfaces
Satin or low-lustreExterior lines such as Benjamin Moore Regal Select Exterior or Sherwin-Williams Duration, made to handle UV, moisture, and temperature swings.
Decks & fences
Stain or paintSemi-transparent or solid stains depending on the age of the wood, such as Benjamin Moore Arborcoat or Sherwin-Williams SuperDeck.
Why Choose Prime Build Solution for Painting
- Detailed surface preparation that follows the same sequence on every job.
- Floors and furniture protected before any work starts.
- Drywall and trim repairs handled in the same scope.
- A written scope covering surfaces, products, and price before work begins.
- Owner-managed projects with one point of contact.
- Clean job sites at the end of every workday.
- A final walkthrough with touch-ups before we finish.
What Homeowners Say About Our Painting Work
★★★★★
"Jose and his colleague were extremely professional, moving and covering all of our furniture during each job and always cleaning up meticulously once each job was completed."
Kelly Blackborow
Painting, Drywall & Floor Repairs
Verified Review★★★★★
"As far as workmanship they just cannot be beat."
sylvigirl
Repeat Customer: Painting & Repairs
Verified Review★★★★★
"His team worked quickly and thoroughly at a reasonable price. We were very pleased!"
Lisa Mangi
Deck Painting & Plank Replacement
Verified ReviewPainting FAQs
Do you provide interior and exterior painting in Arlington?
Yes. We paint interiors (walls, ceilings, doors, trim, stairways, and basements) and exterior wood surfaces such as doors, trim, porch elements, wood siding sections, decks, and fences for homes in Arlington and nearby communities.
Do you repair drywall before painting?
Yes. Drywall repair is part of our regular work. We fix holes, cracks, popped nails, and damaged sections, match the texture, and prime the repairs so they do not show through the finish.
Do you paint doors and trim?
Yes. Interior and exterior doors, baseboards, window and door casings, and crown molding are a large part of our painting work. We use enamels made for trim so the finish stays smooth and holds up to handling.
How many coats of paint are typically applied?
Most surfaces get two finish coats over properly prepared and primed areas. Bare drywall, repairs, stains, and large color changes usually need primer first, and some deep or bright colors need an extra coat. The number of coats is written into your estimate.
Do you supply the paint?
Yes. We supply the paint and materials and include them in the estimate, so the product and sheen for each surface are clear before work begins. If you have already purchased paint, tell us and we will check that it suits the surface.
Do you help with paint colors and sheen?
Yes. We can recommend the right sheen for each surface and help you narrow down colors. For hard decisions, testing samples on your actual walls in your own lighting is the best way to decide.
Do I need to move furniture before painting?
No. We move furniture to the center of the room and cover it. We only ask that you put away small items, valuables, and anything fragile, and take down wall art if you prefer to handle it yourself.
Can you paint occupied condos and apartments?
Yes. We work room by room so you can keep living in the space, protect floors and furniture, and clean up daily. For condo buildings, we follow building rules for work hours, elevator use, and parking, and can provide proof of insurance to management.
Planning a Painting Project in Arlington?
Tell us which rooms or surfaces you want painted and any repairs you have noticed. We will schedule an on-site visit and give you a detailed written estimate.
- Call or text: 703-839-5162
- Email: info@primebuildsolutionllc.com
- Office: 4115 4th St N, Arlington, VA 22203
Your request was submitted successfully
Thank you. We received your painting project details and will contact you shortly to schedule your on-site estimate.
If this is an emergency, please call us at 703-839-5162.
Built to Last